|
|
Mordel's Bar & Grill |
|
|
» |
View previous topic :: View next topic |
Author |
Message |
Rudel Gurken Allisters Light Thunder Major
Joined: 15-Jun-2005 00:00 Posts: 1456 Location: Germany
|
Posted: 15-Feb-2024 12:50 Post subject: Butler BTL-1A |
|
|
TRO: Butler BTL-1A | IndustrialMech Technical Readout
Name/Model: Butler BTL-1A
Designer: Rudel Gurken
Source(s): Custom Mordel.Net Units
Technology: Inner Sphere
Technology Rating: D
Tonnage: 10
Configuration: Biped IndustrialMech
Era/Year: Succession Wars / 3040
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 540,278 C-Bills
Battle Value: 85
Chassis: Osaka BTL Industrial
Power Plant: Kasawa 30 Fuel Cell
Walking Speed: 32.4 kph
Maximum Speed: 54 kph
Jump Jets: None
Jump Capacity: None
Armor: Osaka Basic Commercial
Armament:
Manufacturer: Osaka Heavy Metrics
Primary Factory: New Samarkand
Communications: Headmaster 41-con
Targeting & Tracking: None
================================================================================================
Overview:
The BTL-1A Butler is a small industrial mech used for light manual labor and for supporting
other industrial mechs or techs.
Capabilities:
Its main tools are its fully articulated arms with very sensitive hand actuator controls. A
searchlight is mounted into the right torso and the center torso incorporates a small cargo
space that can be accessed by a hatch that opens similar to a kangaroo pouch. It can be used
for storing light tools.
Deployment:
Butler industrial mechs can be found on technical grounds throughout Kurita space and even
the Outworld Alliance.
Variants:
As this tiny mechs have almost no space for modification no variants are known. Even though
a lot of industrial mechs are weaponised and used as ersatz battle mechs no one was
desperate enough to use one of these.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Industrial 2.00
Engine: 30 Fuel Cell 1.50
Walking MP: 3
Running MP: 5
Jumping MP: 0
Heat Sinks (Single): 1 0.00
Gyro: Standard 1.00
Cockpit: Industrial 3.00
Armor Factor: 35 1.50
Type: Commercial
Internal Armor
Structure Value
Head: 3 9
Center Torso: 4 4
Center Torso (rear): 2
R/L Torso: 3 3
R/L Torso (rear): 2
R/L Arm: 1 2
R/L Leg: 2 3
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
Cargo, Standard (0.5 tons) CT 1 0.50
Searchlight, Mounted RT 1 0.50
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 3
TP: IM, SZ: 1, TMM: 1, MV: 6"
Damage: (S) / (M) / (L) , OV: 0
Armor (A): 1, Structure (S): 1
Specials: BAR, BFC, CT0.5, ENE, FC, SRCH
| _________________ Reality is where the Pizza-man comes from!'Gucken, petzen, verpissen!' (Look at it, squeal it, get the hell away from it!) – Motto of the recon troops'Artillery doesn´t know friend or foe! They only know worthwhile targets!‘ – Kuritan Infantrist
|
|
Back to top |
|
Rudel Gurken Allisters Light Thunder Major
Joined: 15-Jun-2005 00:00 Posts: 1456 Location: Germany
|
Posted: 15-Feb-2024 12:51 Post subject: Butler BTL-1A |
|
|
TRO: Butler BTL-1A | IndustrialMech Technical Readout
Name/Model: Butler BTL-1A
Designer: Rudel Gurken
Source(s): Custom Mordel.Net Units
Technology: Inner Sphere
Technology Rating: D
Tonnage: 10
Configuration: Biped IndustrialMech
Era/Year: Succession Wars / 3040
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 545,061 C-Bills
Battle Value: 86
Chassis: Osaka BTL Industrial
Power Plant: Kasawa 40 Fuel Cell
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph
Jump Jets: None
Jump Capacity: None
Armor: Osaka Basic Commercial
Armament:
Manufacturer: Osaka Heavy Metrics
Primary Factory: New Samarkand
Communications: Headmaster 41-con
Targeting & Tracking: None
================================================================================================
Overview:
The BTL-1A Butler is a small industrial mech used for light manual labor and for supporting
other industrial mechs or techs.
Capabilities:
Its main tools are its fully articulated arms with very sensitive hand actuator controls. A
searchlight is mounted into the right torso and the center torso incorporates a small cargo
space that can be accessed by a hatch that opens similar to a kangaroo pouch. It can be used
for storing light tools.
Deployment:
Butler industrial mechs can be found on technical grounds throughout Kurita space and even
the Outworld Alliance.
Variants:
As this tiny mechs have almost no space for modification no variants are known. Even though
a lot of industrial mechs are weaponised and used as ersatz battle mechs no one was
desperate enough to use one of these.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Industrial 2.00
Engine: 40 Fuel Cell 1.50
Walking MP: 4
Running MP: 6
Jumping MP: 0
Heat Sinks (Single): 1 0.00
Gyro: Standard 1.00
Cockpit: Industrial 3.00
Armor Factor: 35 1.50
Type: Commercial
Internal Armor
Structure Value
Head: 3 9
Center Torso: 4 4
Center Torso (rear): 2
R/L Torso: 3 3
R/L Torso (rear): 2
R/L Arm: 1 2
R/L Leg: 2 3
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
Cargo, Standard (0.5 tons) CT 1 0.50
Searchlight, Mounted RT 1 0.50
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 3
TP: IM, SZ: 1, TMM: 1, MV: 8"
Damage: (S) / (M) / (L) , OV: 0
Armor (A): 1, Structure (S): 1
Specials: BAR, BFC, CT0.5, ENE, FC, SRCH
| _________________ Reality is where the Pizza-man comes from!'Gucken, petzen, verpissen!' (Look at it, squeal it, get the hell away from it!) – Motto of the recon troops'Artillery doesn´t know friend or foe! They only know worthwhile targets!‘ – Kuritan Infantrist
|
|
Back to top |
|
Rudel Gurken Allisters Light Thunder Major
Joined: 15-Jun-2005 00:00 Posts: 1456 Location: Germany
|
Posted: 15-Feb-2024 12:54 Post subject: Butler BTL-1A |
|
|
TRO: Butler BTL-1A | IndustrialMech Technical Readout
Name/Model: Butler BTL-1A
Designer: Rudel Gurken
Source(s): Custom Mordel.Net Units
Technology: Inner Sphere
Technology Rating: D
Tonnage: 10
Configuration: Biped IndustrialMech
Era/Year: Succession Wars / 3040
Rules (Current): Standard
Rules (Era): Standard
Rules (Year): Standard
Total Cost: 545,061 C-Bills
Battle Value: 86
Chassis: Osaka BTL Industrial
Power Plant: Kasawa 40 Fuel Cell
Walking Speed: 43.2 kph
Maximum Speed: 64.8 kph
Jump Jets: None
Jump Capacity: None
Armor: Osaka Basic Commercial
Armament:
Manufacturer: Osaka Heavy Metrics
Primary Factory: New Samarkand
Communications: Headmaster 41-con
Targeting & Tracking: None
================================================================================================
Overview:
The BTL-1A Butler is a small industrial mech used for light manual labor and for supporting
other industrial mechs or techs.
Capabilities:
Its main tools are its fully articulated arms with very sensitive hand actuator controls. A
searchlight is mounted into the right torso and the center torso incorporates a small cargo
space that can be accessed by a hatch that opens similar to a kangaroo pouch. It can be used
for storing light tools.
Deployment:
Butler industrial mechs can be found on technical grounds throughout Kurita space and even
the Outworld Alliance.
Variants:
As this tiny mechs have almost no space for modification no variants are known. Even though
a lot of industrial mechs are weaponised and used as ersatz battle mechs no one was
desperate enough to use one of these.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Industrial 2.00
Engine: 40 Fuel Cell 1.50
Walking MP: 4
Running MP: 6
Jumping MP: 0
Heat Sinks (Single): 1 0.00
Gyro: Standard 1.00
Cockpit: Industrial 3.00
Armor Factor: 35 1.50
Type: Commercial
Internal Armor
Structure Value
Head: 3 5
Center Torso: 4 4
Center Torso (rear): 2
R/L Torso: 3 4
R/L Torso (rear): 2
R/L Arm: 1 2
R/L Leg: 2 4
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
Cargo, Standard (0.5 tons) CT 1 0.50
Searchlight, Mounted RT 1 0.50
================================================================================================
Alpha Strike Statistics
------------------------------------------------------------------------------------------------
Point Value (PV): 3
TP: IM, SZ: 1, TMM: 1, MV: 8"
Damage: (S) / (M) / (L) , OV: 0
Armor (A): 1, Structure (S): 1
Specials: BAR, BFC, CT0.5, ENE, FC, SRCH
| _________________ Reality is where the Pizza-man comes from!'Gucken, petzen, verpissen!' (Look at it, squeal it, get the hell away from it!) – Motto of the recon troops'Artillery doesn´t know friend or foe! They only know worthwhile targets!‘ – Kuritan Infantrist
|
|
Back to top |
|
|
|
» |
All times are GMT-05:00 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
|
|
|
|
|