Mordel's Bar & Grill
Reworking the old
 Pages (2): « [1] 2 »
Post new topic   Reply to topic    Mordel's Bar & Grill Forum Index » Design Submissions
View previous topic :: View next topic  
Author Message
Erenon
Blighted Sun Battalion
2nd Company
"Seraph's Slaughter"
Sergeant
Sergeant


Joined: 04-Jun-2004 00:00
Posts: 976
Location: Singapore
PostPosted: 15-Feb-2005 02:00    Post subject: Reworking the old Reply to topic Reply with quote

I've been playing with the idea of taking the old 3025 mechs and applying upgrade kits on them.

i'm aware that many of the 3050 mechs are supposed to be such. But i'm looking at a 3067 perspective and also based on my bias about what an upgrade kit entails.

Here's my thought.

A) No change in engine. In any way.
B) No change in structure, ie no Endo Steel.
C) Heat Sinks can be changed to Double.
D) Armour to ferro fibrous sounds ok
E) Weapons should stay as close to the original load out as possible. A PPC/LB-10X/Ultra AC/10/Rotary AC/5 for an AC/10 is fine.. but not a large laser or LRM. (even the PPC needs some good explaining... like lots of heat sinks in the same location)

_________________
"My job is to keep the majority of people in this country alive. That's it. If fifty-one percent eat a meal tomorrow and forty-nine percent don't, I've done my job." - The Beast (AKA The President), Transmetropolitan
Back to top View profile Send site message
Warhammer: 3025
Freelance
Captain, AFFC (Ret.)
Captain, AFFC (Ret.)


Joined: 29-Jan-2005 00:00
Posts: 1856

PostPosted: 15-Feb-2005 02:37    Post subject: RE: Reworking the old Reply to topic Reply with quote

Hey! You stole my ideas!

I've been designing upgrade kits along just such lines. Like the BLR-2G Battlemaster in the TRO section. I've also upgraded the Locust, Stinger, Wasp (although that one didn't go very well for some reason), Spider, Clint, Pheonix Hawk, Shadow Hawk, Wyvern, Centurion, Trebuchet, Griffin, Rifleman, Warhammer, and Marauder along the same lines.
_________________
Evil is like a bowl of oranges. Only one, instead, is an orange of DOOM. That orange has a fate to rule over the other oranges with an iron fist. That orange is me.

Because sometimes, there are many guards in the castle.


Ya Rl'yeh!
Back to top View profile Send site message
Erenon
Blighted Sun Battalion
2nd Company
"Seraph's Slaughter"
Sergeant
Sergeant


Joined: 04-Jun-2004 00:00
Posts: 976
Location: Singapore
PostPosted: 15-Feb-2005 03:00    Post subject: RE: Reworking the old Reply to topic Reply with quote

I think i need to mention here that i'm also trying ot work things from a very regional view. IE How the Draconis Combine does an upgrade kit and how the FedCOm does an upgrade kit for the same Mech are likely to be very different.

_________________
"My job is to keep the majority of people in this country alive. That's it. If fifty-one percent eat a meal tomorrow and forty-nine percent don't, I've done my job." - The Beast (AKA The President), Transmetropolitan
Back to top View profile Send site message
Warhammer: 3025
Freelance
Captain, AFFC (Ret.)
Captain, AFFC (Ret.)


Joined: 29-Jan-2005 00:00
Posts: 1856

PostPosted: 15-Feb-2005 03:03    Post subject: RE: Reworking the old Reply to topic Reply with quote



Please elaborate.
_________________
Evil is like a bowl of oranges. Only one, instead, is an orange of DOOM. That orange has a fate to rule over the other oranges with an iron fist. That orange is me.

Because sometimes, there are many guards in the castle.


Ya Rl'yeh!
Back to top View profile Send site message
Erenon
Blighted Sun Battalion
2nd Company
"Seraph's Slaughter"
Sergeant
Sergeant


Joined: 04-Jun-2004 00:00
Posts: 976
Location: Singapore
PostPosted: 15-Feb-2005 03:32    Post subject: RE: Reworking the old Reply to topic Reply with quote

Take a look at my ENF-4R2 Enforcer. it mounts a RAC 5, a very davion/fedcom weapon. Of course the Enforcer IS a fedcom mech but if the FWL were to upgrade it, they might replace the AC/10 with a LB-10X.

_________________
"My job is to keep the majority of people in this country alive. That's it. If fifty-one percent eat a meal tomorrow and forty-nine percent don't, I've done my job." - The Beast (AKA The President), Transmetropolitan
Back to top View profile Send site message
Warhammer: 3025
Freelance
Captain, AFFC (Ret.)
Captain, AFFC (Ret.)


Joined: 29-Jan-2005 00:00
Posts: 1856

PostPosted: 15-Feb-2005 05:01    Post subject: RE: Reworking the old Reply to topic Reply with quote

Ah. I get it.
_________________
Evil is like a bowl of oranges. Only one, instead, is an orange of DOOM. That orange has a fate to rule over the other oranges with an iron fist. That orange is me.

Because sometimes, there are many guards in the castle.


Ya Rl'yeh!
Back to top View profile Send site message
StarRaven
Federated Suns
Leftenant General
Leftenant General


Joined: 01-Jun-2004 00:00
Posts: 1138
Location: United States
PostPosted: 15-Feb-2005 15:53    Post subject: RE: Reworking the old Reply to topic Reply with quote

The FWL is more likely to use an Ultra/10 of light gauss, I would think. This sounds like an excellent idea, especially the way you're going to do it regionally. Plus, the a number of the 3050 designs aren't that great; AS7-K, for example. I look forward to seeing what you come up with.

_________________
"Politics is supposed to be the second oldest profession. I have come to realize that it bears a very close semblance to the first."
- Attributed to General Aleksandr Kerensky
Back to top View profile Send site message Send e-mail
Karagin
Imperial Karagin Army
Imperial General
Imperial General


Joined: 04-Feb-2002 00:00
Posts: 4120
Location: United States
PostPosted: 15-Feb-2005 16:01    Post subject: RE: Reworking the old Reply to topic Reply with quote

Uhmm you are aware that RS:Upgrades has more or less done this?

None the less it's an interesting idea, and if you plan to stick to upgrades for the houses using only what they have then it will prove to be interesting.

_________________
Karagin
Only the dead have seen the end of war. - Plato

"Wasted trip Man. Nobody said nuthin' about lockin' horns with no tigers." Oddball
Back to top View profile Send site message Send e-mail
Erenon
Blighted Sun Battalion
2nd Company
"Seraph's Slaughter"
Sergeant
Sergeant


Joined: 04-Jun-2004 00:00
Posts: 976
Location: Singapore
PostPosted: 15-Feb-2005 16:03    Post subject: RE: Reworking the old Reply to topic Reply with quote

RS Upgades probably did. But i feel they were trying to kill the poor pilots...


_________________
"My job is to keep the majority of people in this country alive. That's it. If fifty-one percent eat a meal tomorrow and forty-nine percent don't, I've done my job." - The Beast (AKA The President), Transmetropolitan
Back to top View profile Send site message
Stinger
The Knights of Chaos
General
General


Joined: 30-Apr-2002 00:00
Posts: 1833
Location: United States
PostPosted: 15-Feb-2005 16:50    Post subject: RE: Reworking the old Reply to topic Reply with quote

Quote:

On 2005-02-15 02:00, Erenon wrote:
I've been playing with the idea of taking the old 3025 mechs and applying upgrade kits on them.

i'm aware that many of the 3050 mechs are supposed to be such. But i'm looking at a 3067 perspective and also based on my bias about what an upgrade kit entails.

Here's my thought.

A) No change in engine. In any way.
B) No change in structure, ie no Endo Steel.
C) Heat Sinks can be changed to Double.
D) Armour to ferro fibrous sounds ok
E) Weapons should stay as close to the original load out as possible. A PPC/LB-10X/Ultra AC/10/Rotary AC/5 for an AC/10 is fine.. but not a large laser or LRM. (even the PPC needs some good explaining... like lots of heat sinks in the same location)



A small problem I can see. As far as I know to change the heatsinks (from single to double) that would (again IIRC) require a major over haul or a complete engine replacment altogether. But one question why does a PPC need explaning? when say a ultra10 or rotary ac (a weapon that is on the same level as the clan pulse laser imo) not need explaning?

In all honesty a field upgradekit should have everything in it you need to upgrade the mech to what your commanders have decided is appropriate for that design, which means, engine, internal strusture, sensor, packages, what ever they figure is nessary would be included, and changed.

_________________
Stinger
If it's "creepy" to use the Internet, military satellites, and robot aircraft to find a house full of gorgeous young models so I can drop in on them unexpected, then FINE, I'm "creepy". Howard Wolowitz. BBT.
Back to top View profile Send site message Send e-mail
Seraph
Blighted Sun Battalion
2nd Company
"Seraph's Slaughter"
Major
Major


Joined: 11-Mar-2004 00:00
Posts: 1744

PostPosted: 15-Feb-2005 16:57    Post subject: RE: Reworking the old Reply to topic Reply with quote

I think he means to implement field refits. The high command has received X amount of new tech. These are then distrtibuted to the ranks in a cetain pecking order. So, say your unit received 10 LB-10X AC's with accompanying ammo supplies, 46 double heatsinks, and 12 medium pulse lasers. You take those items and work them into your existing designs. Their placement is ultimately determined by your technical staff. To my understanding this is the primary method of field refits. Get into components that require a facility to make the changes and it goes from field refit to overhaul.
_________________
If ignorance is bliss, then why are you so miserable?
Back to top View profile Send site message
Erenon
Blighted Sun Battalion
2nd Company
"Seraph's Slaughter"
Sergeant
Sergeant


Joined: 04-Jun-2004 00:00
Posts: 976
Location: Singapore
PostPosted: 15-Feb-2005 19:07    Post subject: RE: Reworking the old Reply to topic Reply with quote

Quote:

On 2005-02-15 16:57, Seraph wrote:
I think he means to implement field refits. The high command has received X amount of new tech. These are then distrtibuted to the ranks in a cetain pecking order. So, say your unit received 10 LB-10X AC's with accompanying ammo supplies, 46 double heatsinks, and 12 medium pulse lasers. You take those items and work them into your existing designs. Their placement is ultimately determined by your technical staff. To my understanding this is the primary method of field refits. Get into components that require a facility to make the changes and it goes from field refit to overhaul.



I was thinking more factory produced upgrade kits designed to require as little work as possible to implement. Say a downtime of less than a week. Which is why i left out replacing structure and engine.. think that's a bit off..

As for the rest as Karagin said, heat sinks requires quite a bit of an overhaul.. but my belief is that the heat sinks to double heat sinks can be the results of replacing existing vents, cooling units that could result in additional space taken up (when the engine is too small to hold all the heat sinks..). It will require serious work, but i believe it can be done (or the few episodes of American Choppers got to me.. )

Karagin: "But one question why does a PPC need explaning? when say a ultra10 or rotary ac (a weapon that is on the same level as the clan pulse laser imo) not need explaning?"

Good point... ok. they ALL need explaining :-p

_________________
"My job is to keep the majority of people in this country alive. That's it. If fifty-one percent eat a meal tomorrow and forty-nine percent don't, I've done my job." - The Beast (AKA The President), Transmetropolitan
Back to top View profile Send site message
bladewind
Free Rasalhague Republic
Major General
Major General


Joined: 02-Oct-2004 00:00
Posts: 1054
Location: Singapore
PostPosted: 15-Feb-2005 20:38    Post subject: RE: Reworking the old Reply to topic Reply with quote

Swapping heatsinks for doubles would require a factory at least. Which isnt ideal in the field of battle unless the commander in question has a few of his own and can devote the time and manpower to defend it from raiders.

the downtime for the mech can be long as a week or even 2 weeks ! depending how many heatsinks it carries.
Back to top View profile Send site message
Erenon
Blighted Sun Battalion
2nd Company
"Seraph's Slaughter"
Sergeant
Sergeant


Joined: 04-Jun-2004 00:00
Posts: 976
Location: Singapore
PostPosted: 15-Feb-2005 21:21    Post subject: RE: Reworking the old Reply to topic Reply with quote

I don't think it needs a factory. But it WILL need a decent Mech Bay and competent techs. Something which most House units SHOULD have access to.

As for the week, yeah that's what i said didn't i?


What i need is the MW RPG or some other source that has repair times and the like...

_________________
"My job is to keep the majority of people in this country alive. That's it. If fifty-one percent eat a meal tomorrow and forty-nine percent don't, I've done my job." - The Beast (AKA The President), Transmetropolitan
Back to top View profile Send site message
Karagin
Imperial Karagin Army
Imperial General
Imperial General


Joined: 04-Feb-2002 00:00
Posts: 4120
Location: United States
PostPosted: 15-Feb-2005 21:25    Post subject: RE: Reworking the old Reply to topic Reply with quote

Quote:

On 2005-02-15 19:07, Erenon wrote:
Karagin: "But one question why does a PPC need explaning? when say a ultra10 or rotary ac (a weapon that is on the same level as the clan pulse laser imo) not need explaning?"

Good point... ok. they ALL need explaining :-p



Uhmm...Stinger asked that not me....I pointed out that the RS Upgrades had more or less done what you are doing, though not as a single X weapon change out on a mech...


_________________
Karagin
Only the dead have seen the end of war. - Plato

"Wasted trip Man. Nobody said nuthin' about lockin' horns with no tigers." Oddball
Back to top View profile Send site message Send e-mail
Display posts from previous:
Post new topic   Reply to topic    Mordel's Bar & Grill Forum Index » Design Submissions All times are GMT-05:00
 Pages (2): « [1] 2 »

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum