|
|
Mordel's Bar & Grill |
|
|
» |
View previous topic :: View next topic |
Author |
Message |
Snowjeepney Federated Suns Recruit
Joined: 23-Jan-2016 12:45 Posts: 8 Location: Canada
|
Posted: 14-Jul-2019 17:49 Post subject: Marshall MSH-2L |
|
|
TRO: Marshall MSH-2L | BattleMech Technical Readout
Name/Model: Marshall MSH-2L
Designer: Snowjeepney
Source(s): Custom Mordel.Net Units
Technology: Inner Sphere
Technology Rating: E
Tonnage: 55
Configuration: Biped BattleMech
Era/Year: Late Succession Wars / 3049
Rules (Current): Tournament Legal
Rules (Era): Tournament Legal
Rules (Year): Tournament Legal
Total Cost: 5,708,857 C-Bills
Battle Value: 1,646
Chassis: Crucis-E Endo Steel
Power Plant: Core Tek 275
Walking Speed: 54 kph
Maximum Speed: 86.4 kph
Jump Jets: Rawlings 80-Beta
Jump Capacity: 150 meters
Armor: Durallex Super Medium Ferro-Fibrous with CASE
Armament:
1 Johnston High Speed ER PPC
1 Harpoon-6 SRM 6
4 Intek Medium Lasers
2 Blazefire Spreadshot Small Pulse Lasers
Manufacturer: Unknown
Primary Factory: Unknown
Communications: Johnston Wide Band
Targeting & Tracking: Sync Tracker (39-42071)
================================================================================================
Overview:
Johnston Industries surprised everyone (including ComStar) when the company
unveiled the 55-ton Marshall, a few months after the unveiling of the Caesar
battlemech. Besides being Johnston Industries' attempt at creating the
medium-class battlemech, the Marshall was also the company's first battlemech
that was built with an Endo-Steel Chassis. While the design was primarily
influenced by the Griffin and the Wolverine, the Marshall was sometimes called
the "baby Battlemaster" due to its somewhat passing resemblance of the 85-ton
Battlemaster.
Capabilities:
The Marshall's primary long-range weapon is a Johnston High Speed ER PPC, which
is mounted on the right arm. For close-range, the Marshal has two Intek Medium
Lasers in each side torso, further augmented by a Harpoon-6 SRM-6 launcher on
the left torso, supplied with one ton of CASE-protected ammunition bin.
Furthermore, to counter enemy infantry attacks, the Marshall has two Blazefire
Spreadshot Small Pulse Lasers, both of them mounted on the left arm. Eleven
double heat sinks provide adequate cooling capability, although the cooling
system could get overwhelmed if all the weapons are fired simultaneously.
The Marshall's CoreTek 275-rated Standard Fusion Engine provides a respectable
max ground speed of 86.4 km/h, while its mobility is further enhanced by five
jump jets, with two in each leg, and one in the rear torso. Finally, 9.5 tons
of Ferro-Fibrous Armor ensure that the Marshall is well-protected.
Deployment:
The Marshall would be well-received by forces on both sides of Federated
Commonwealth, with a respectable number of orders placed for the battlemech.
However, demand for the Marshall would significantly increase during the Clan
Invasion; as a result, many of the produced Marshalls were sent to units on the
Clan front.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo Steel 3.00
Engine: 275 Fusion 15.50
Walking MP: 5
Running MP: 8
Jumping MP: 5
Heat Sinks (Double): 11 [22] 1.00
Gyro: Standard 3.00
Cockpit: Standard 3.00
Armor Factor: 170 9.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 18 23
Center Torso (rear): 10
R/L Torso: 13 20
R/L Torso (rear): 6
R/L Arm: 9 18
R/L Leg: 13 20
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
Jump Jet CT 1 0.50
2 Medium Lasers RT 2 2.00
CASE LT 1 0.50
2 Medium Lasers LT 2 2.00
SRM 6 LT 2 3.00
SRM 6 (Ammo 15) LT 1 1.00
ER PPC RA 3 7.00
2 Small Pulse Lasers LA 2 2.00
2 Jump Jets RL 2 1.00
2 Jump Jets LL 2 1.00
|
|
|
Back to top |
|
Snowjeepney Federated Suns Recruit
Joined: 23-Jan-2016 12:45 Posts: 8 Location: Canada
|
Posted: 14-Jul-2019 17:50 Post subject: Marshall MSH-2L |
|
|
TRO: Marshall MSH-2L | BattleMech Technical Readout
Name/Model: Marshall MSH-2L
Designer: Snowjeepney
Source(s): Custom Mordel.Net Units
Technology: Inner Sphere
Technology Rating: E
Tonnage: 55
Configuration: Biped BattleMech
Era/Year: Late Succession Wars / 3049
Rules (Current): Tournament Legal
Rules (Era): Tournament Legal
Rules (Year): Tournament Legal
Total Cost: 5,708,857 C-Bills
Battle Value: 1,646
Chassis: Crucis-E Endo Steel
Power Plant: Core Tek 275
Walking Speed: 54 kph
Maximum Speed: 86.4 kph
Jump Jets: Rawlings 80-Beta
Jump Capacity: 150 meters
Armor: Durallex Super Medium Ferro-Fibrous with CASE
Armament:
1 Johnston High Speed ER PPC
1 Harpoon-6 SRM 6
4 Intek Medium Lasers
2 Blazefire Spreadshot Small Pulse Lasers
Manufacturer: Unknown
Primary Factory: Unknown
Communications: Johnston Wide Band
Targeting & Tracking: Sync Tracker (39-42071)
================================================================================================
Overview:
Johnston Industries surprised everyone (including ComStar) when the company
unveiled the 55-ton Marshall, a few months after the unveiling of the Caesar
battlemech. Besides being Johnston Industries' attempt at creating the
medium-class battlemech, the Marshall was also the company's first battlemech
that was built with an Endo-Steel Chassis. While the design was primarily
influenced by the Griffin and the Wolverine, the Marshall was sometimes called
the "baby Battlemaster" due to its somewhat passing resemblance of the 85-ton
Battlemaster.
Capabilities:
The Marshall's primary long-range weapon is a Johnston High Speed ER PPC, which
is mounted on the right arm. For close-range, the Marshal has two Intek Medium
Lasers in each side torso, further augmented by a Harpoon-6 SRM-6 launcher on
the left torso, supplied with one ton of CASE-protected ammunition bin.
Furthermore, to counter enemy infantry attacks, the Marshall has two Blazefire
Spreadshot Small Pulse Lasers, both of them mounted on the left arm. Eleven
double heat sinks provide adequate cooling capability, although the cooling
system could get overwhelmed if all the weapons are fired simultaneously.
The Marshall's CoreTek 275-rated Standard Fusion Engine provides a respectable
max ground speed of 86.4 km/h, while its mobility is further enhanced by five
jump jets, with two in each leg, and one in the rear torso. Finally, 9.5 tons
of Ferro-Fibrous Armor ensure that the Marshall is well-protected.
Deployment:
The Marshall would be well-received by forces on both sides of Federated
Commonwealth, with a respectable number of orders placed for the battlemech.
However, demand for the Marshall would significantly increase during the Clan
Invasion; as a result, many of the produced Marshalls were sent to units on the
Clan front.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo Steel 3.00
Engine: 275 Fusion 15.50
Walking MP: 5
Running MP: 8
Jumping MP: 5
Heat Sinks (Double): 11 [22] 1.00
Gyro: Standard 3.00
Cockpit: Standard 3.00
Armor Factor: 170 9.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 18 23
Center Torso (rear): 10
R/L Torso: 13 20
R/L Torso (rear): 6
R/L Arm: 9 18
R/L Leg: 13 20
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
Jump Jet CT 1 0.50
2 Medium Lasers RT 2 2.00
CASE LT 1 0.50
2 Medium Lasers LT 2 2.00
SRM 6 LT 2 3.00
SRM 6 (Ammo 15) LT 1 1.00
ER PPC RA 3 7.00
2 Small Pulse Lasers LA 2 2.00
2 Jump Jets RL 2 1.00
2 Jump Jets LL 2 1.00
|
|
|
Back to top |
|
Snowjeepney Federated Suns Recruit
Joined: 23-Jan-2016 12:45 Posts: 8 Location: Canada
|
Posted: 14-Jul-2019 17:51 Post subject: Marshall MSH-2L |
|
|
TRO: Marshall MSH-2L | BattleMech Technical Readout
Name/Model: Marshall MSH-2L
Designer: Snowjeepney
Source(s): Custom Mordel.Net Units
Technology: Inner Sphere
Technology Rating: E
Tonnage: 55
Configuration: Biped BattleMech
Era/Year: Late Succession Wars / 3049
Rules (Current): Tournament Legal
Rules (Era): Tournament Legal
Rules (Year): Tournament Legal
Total Cost: 5,708,857 C-Bills
Battle Value: 1,646
Chassis: Crucis-E Endo Steel
Power Plant: Core Tek 275
Walking Speed: 54 kph
Maximum Speed: 86.4 kph
Jump Jets: Rawlings 80-Beta
Jump Capacity: 150 meters
Armor: Durallex Super Medium Ferro-Fibrous with CASE
Armament:
1 Johnston High Speed ER PPC
1 Harpoon-6 SRM 6
4 Intek Medium Lasers
2 Blazefire Spreadshot Small Pulse Lasers
Manufacturer: Johnston Industries
Primary Factory: New Syrtis
Communications: Johnston Wide Band
Targeting & Tracking: Sync Tracker (39-42071)
================================================================================================
Overview:
Johnston Industries surprised everyone (including ComStar) when the company
unveiled the 55-ton Marshall, a few months after the unveiling of the Caesar
battlemech. Besides being Johnston Industries' attempt at creating the
medium-class battlemech, the Marshall was also the company's first battlemech
that was built with an Endo-Steel Chassis. While the design was primarily
influenced by the Griffin and the Wolverine, the Marshall was sometimes called
the "baby Battlemaster" due to its somewhat passing resemblance of the 85-ton
Battlemaster.
Capabilities:
The Marshall's primary long-range weapon is a Johnston High Speed ER PPC, which
is mounted on the right arm. For close-range, the Marshal has two Intek Medium
Lasers in each side torso, further augmented by a Harpoon-6 SRM-6 launcher on
the left torso, supplied with one ton of CASE-protected ammunition bin.
Furthermore, to counter enemy infantry attacks, the Marshall has two Blazefire
Spreadshot Small Pulse Lasers, both of them mounted on the left arm. Eleven
double heat sinks provide adequate cooling capability, although the cooling
system could get overwhelmed if all the weapons are fired simultaneously.
The Marshall's CoreTek 275-rated Standard Fusion Engine provides a respectable
max ground speed of 86.4 km/h, while its mobility is further enhanced by five
jump jets, with two in each leg, and one in the rear torso. Finally, 9.5 tons
of Ferro-Fibrous Armor ensure that the Marshall is well-protected.
Deployment:
The Marshall would be well-received by forces on both sides of Federated
Commonwealth, with a respectable number of orders placed for the battlemech.
However, demand for the Marshall would significantly increase during the Clan
Invasion; as a result, many of the produced Marshalls were sent to units on the
Clan front.
================================================================================================
Equipment Mass
------------------------------------------------------------------------------------------------
Internal Structure: Endo Steel 3.00
Engine: 275 Fusion 15.50
Walking MP: 5
Running MP: 8
Jumping MP: 5
Heat Sinks (Double): 11 [22] 1.00
Gyro: Standard 3.00
Cockpit: Standard 3.00
Armor Factor: 170 9.50
Type: Ferro-Fibrous
Internal Armor
Structure Value
Head: 3 9
Center Torso: 18 23
Center Torso (rear): 10
R/L Torso: 13 20
R/L Torso (rear): 6
R/L Arm: 9 18
R/L Leg: 13 20
================================================================================================
Weapons and Ammo Location Critical Tonnage
------------------------------------------------------------------------------------------------
Jump Jet CT 1 0.50
2 Medium Lasers RT 2 2.00
CASE LT 1 0.50
2 Medium Lasers LT 2 2.00
SRM 6 LT 2 3.00
SRM 6 (Ammo 15) LT 1 1.00
ER PPC RA 3 7.00
2 Small Pulse Lasers LA 2 2.00
2 Jump Jets RL 2 1.00
2 Jump Jets LL 2 1.00
|
|
|
Back to top |
|
|
|
» |
All times are GMT-05:00 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
|
|
|
|
|
|